Motorola GP-68

LCD Segments and Indicators
38
LCD Segments and Indicators
Indicators
TX - Lights up when radio is transmitting.
LOW - Lights up when radio is in low transmit power
mode.
CTCSS - Lights up continuously for Coded Squelch
mode; Off for Carrier Squelch mode; Flashes for Sig-
nalling Squelch mode (if available).
SCAN - Flashes when radio is scanning; Lights up
continuously when scan is suspended.
BATT - Flashes when battery voltage is low.
SAVE - Flashes quickly when Normal Battery Saver
mode is enabled; flashes slowly when Enhanced Bat-
tery Saver mode is enabled; nothing displayed when
Battery Saver is disabled.
Indicators with Segments
SIGNAL - uses six bar segments to indicate the rela-
tive receive (Rx) signal strength. SIGNAL lights up
upon receiving a Rx signal strength greater than 10 dB
SINAD. As the signal strength increases, additional
bar segments light up, starting from the left-most bar
segment.
TX
LOW CTCSS
SCAN
BATT
SAVE
SIGNAL