Motorola GP-68

DTMF Telephone Interconnect
23
DTMF Telephone Interconnect
Dual Tone Multiple Frequency (DTMF) tones are
encoded by the radio to dial into (
access ) the
landline telephone network and return (
deaccess) to
conventional radio operation.
Once the telephone network has been accessed,
phone numbers can be dialled either manually or from
memory. The keypad provides support for DTMF digits
0 to 9, and the characters A, B, C, D, ∗ and #.
NOTE
The radio is capable of storing a maximum of 9 pre-
programmed phone numbers (up to 12 digits each).
Placing a Telephone Call
To place a call:
➊
Press and hold the Push-To-Talk (PTT) Button (6).
➋ Dial the access code manually using the DTMF
keys or press then to send the prepro-
grammed access code.
➌ Release the Push-To-Talk (PTT) Button (6) and
wait for a dial tone.
➍ Press and hold the Push-To-Talk (PTT) Button (6)
and either manually dial the telephone number or
press and the phone number location that
stores the preprogrammed telephone number.
➎ Press the Push-To-Talk (PTT) Button (6) to talk;
release to listen.
#
ME
M
ME
M