Voice Selective Call (Optional)
27
Voice Selective Call (Optional)
To support Voice Selective Call (SelCall) operation, the
radio must be equipped with an optional DTMF
Decode board.
NOTE
For more information about the availability of this
option, contact your dealer.
If your radio is equipped with the Voice Selective Call
option, your radio can be called individually by another
user, or as part of a small group.
Receiving a Voice Selective Call
When the radio decodes a Voice Selective Call, the
LCD Screen (18)
indicates the type of SelCall mes-
sage being received:
NOTE
The radio will give an alert tone when it success-
fully decodes a Voice Selective Call. If either
Selec-
tive Call Tone Status
or
Alert Tone Volume
is set to
“OFF” (see page 33 and 35 ), no tone is heard.
For an
Individual Call
, the radio automatically trans-
mits an
Acknowledgement
message back to the call-
ing radio, if an
Acknowledgement ID
has been
preprogrammed by the dealer.
Individual Call
Group Call
ALL Call
To Next Page
Loading...
