Motorola GP-68

Scan Operations
21
Scan Operations
Scan operation tells the radio to monitor a list of pre-
programmed channels (see
“Editing the Channel
Scan List”
on page 31). When there are some activi-
ties at a particular channel, the radio stops scanning
and changes to that channel.
NOTE
Each channel is given the same scan priority i.e.
non-priority scan.
IMPORTANT
The radio will not recall the scan state if it is pow-
ered off while scanning.
NOTE
Channels may be temporarily removed from the
scan list using the Nuisance Channel Delete fea-
ture (see
“Deleting a Nuisance Channel” on
page 22).
• Press momentarily to begin channel scanning.
NOTE
While scanning is in progress, the Home Channel
(the channel the radio was active at before
was pressed) is displayed until activity is received
on another channel.
To stop the scan operation:
• Press again momentarily.
N-DEL
D
SCAN
SCAN
N-DEL
D
SCAN
N-DEL
D
SCAN