Motorola GP280 User Manual

TRUNKED FEATURES
36
English
AUTOMATIC MULTIPLE SITE SELECTION
(AMSS)
The automatic multiple site selection (AMSS) feature
extends communications beyond the reach of a single
trunked site. In a system where wide-area coverage is
required, multiple trunking sites are used.
AMSS automatically switches the radio to a different
site when the current-site signal becomes too weak.
Typically, this happens when the radio is moved out of
the range of one site and into the range of another.
Under normal conditions, this switching is invisible to
the user.
Viewing the Current Site
Forcing a Site Change
Locking and Unlocking a Site
1. Press the search button.
2. If the radio is locked on a
site, the display shows
the current site.
3. If the radio is scanning
for a new site, the dis-
play shows
“SCANNING” until it
locks on a new site.
Then it shows the
number of the new site.
SITE 4
SCANNING
SITE 7
1. Press and hold down the search button to
force the change to a new site.
2. You will hear a tone
while the radio scans for
a new site.
3. The radio automatically
returns to the home dis-
play.
1. Press / until SITE is
displayed.
2. Press l (the softkey below SITE).
3. The current lock state is
momentarily displayed.
or
4. The display changes to
5. Press the key below the desired lock state.
6. The radio automatically
returns to the home
display.
SCANNING
PLANT POLICE
SITE
PAGE CALL
SITE LOCKED
SITE UNLOCKED
LOCK UNLK
PLANT POLICE
UG_240_280_EN.fm Page 36 Wednesday, August 14, 2002 10:30 AM

Motorola GP280 Specifications

General

Brand	Motorola
Model	GP280
Category	Radio
Language	English