5
RADIO OVERVIEW
English
Programmable Buttons
Several of your radio buttons can be programmed (by
using the Customer Programming Software — CPS)
to activate the radio features.
Programmable buttons are
• Top button
• Three side buttons
Check with your dealer or Motorola representative for
a complete list of the functions your radio’s
programmable buttons support.
The table below shows the functions available by
• short press - quickly pressing and releasing the
programmable buttons, or
• long press - pressing and holding the
programmable buttons for a period of time
before releasing, or
• hold down- pressing and holding down the
programmable buttons while checking status or
making adjustments.
Button Short Press Long Press Hold Down
Monitor/Permanent
Monitor
—
Continually monitors the
selected channel.
Monitors the selected
channel for any activity.
Volume Set — —
Sounds a tone for adjusting
the radio’s volume level.
Scan
Toggles between the start/stop of the
Scan operation.
——
Nuisance Delete
Temporarily deletes an unwanted
active scan member.
——
Search Makes a system search.
Light Turns on/off your radio’s backlight. — —
Call Enters or exits a Private call.
Page Enters or exits a Call Alert.
Call Response
Respond to or exit from a Private
Call or Call Alert.
——
Phone Enters or leaves Phone mode. — —
UG_240_280_EN.fm Page 5 Wednesday, August 14, 2002 10:30 AM
To Next Page
Loading...
Need help?
General