Motorola GP88s

3-2 Service Aids
2.0 Service Aids
Table 3-2 lists service aids recommended for working on the GP88s Radios. While all of these items
are available from Motorola, most are standard shop equipment items, and any equivalent item
capable of the same performance may be substituted for the item listed.
Table 3-2 Service Aids
Motorola
Part No.
Description Application
RLN4460A Portable Test Set Enables connection to the audio/accessory jack.
Allows switching for radio testing.
PMVN4029 Tuner - Software on 3.5” floppy
diskettes
Tune hardware parameters, front end, power, devia-
tion, etc.
PMVN4037 Tuner - Software on CD Rom Tune hardware parameters, front end, power, devia-
tion, etc.
PMVN4047 Customer Programming Soft-
ware - Software on 3.5” floppy
diskettes
Program customer option and channel data.
PMVN4048 Customer Programming Soft-
ware - Software on CD Rom
Program customer option and channel data.
PMKN4004A Programming Cable/Test Cable Connects radio to RIB (RLN4008B).
PMKN4003A Radio to Radio Cloning Cable Allows a radio to be duplicated from a master radio by
transferring programmed data from the master radio
to the other.
RLN4008B Radio Interface Box Enables communications between the radio and the
computer’s serial communications adapter.
HLN9756B BNC-RF Adaptor Adapts radio’s antenna port to BNC cabling of test
equipment.
0180305H20
8180384J58
Shop Battery Eliminator
Bench Test Housing Eliminator
Interconnects radio to power supply. Provides for
troubleshooting of the radio when the housing is
removed.
0180357A57 Wall-Mounted Power Supply Used to supply power to the RIB (120 VAC).
0180358A56 Wall-Mounted Power Supply Used to supply power to the RIB (220 VAC)
3080369B71
or
3080369B72
Computer Interface Cable Use B72 for the IBM PC AT. All other IBM models use
B71. Connects the computer’s serial communications
adapter to the RIB. (RLN4008B)