Radio Disassembly — Detailed 4-5
The following disassembly procedures should be performed only if necessary:
Chassis Assembly Disassembly (Paragraph 6.2)
Keypad/Option Board Disassembly (Paragraph 6.3)
Speaker, Microphone, and Wire Disassembly (Paragraph 6.4)
PTT Disassembly (Paragraph 6.5)
Control Top Disassembly (Paragraph 6.6)
6.0 Radio Disassembly — Detailed
6.1 Front Cover from Chassis Disassembly
1. Turn off the radio.
2. Remove the battery:
a. Pull down on the two battery-release buttons.
b. With the buttons pulled down, the top of the battery will fall from the radio.
c. Remove the battery from the radio.
3. Remove the antenna.
Figure 4-1 Battery Removal
Dust Cover
Battery Release Buttons
To Next Page
Loading...
