Motorola GP88s

Option Board Installation 4-15
8.1 Configuring the Radio after Option Board Installation
1. Connect the radio to the computer following instructions outlined in Section 6.
2. Start up the CPS, and read the radio’s codeplug.
3. Open the Radio Configuration dialog box, and proceed to the Option Board tab. From the pull-down menu,
choose the option board type that you just installed (choose Simple Decoder for the DTMF option board).
4. Open the Personality dialog box. For every personality that you want the option board features to be acti-
vated, click on the Option Board Feature check box of the Advanced tab.
Figure 4-13 Option Board tab of the Radio Configuration dialog box.
Figure 4-14 Advanced tab of the Personality dialog box.