PREPARING FOR FIELD LEVEL TESTING: Remove Battery Cover
48 68P80401P05
7.8 Remove Battery Cover
7.8.1 Remove:
1. Place thumb or fingernail against release latch (see Figure 7-2).
2. Push or pull down latch.
3. Hold latch in the down position and use fingernail to lift cover off housing bottom edge.
4. Pull cover down slightly to release from top clips and pull up to remove.
7.8.2 Install:
1. Bring top clips of cover into their respective slots.
2. While keeping clips engaged, close cover until release latch fully snaps into place.
Figure 7-2.
2
33
To Next Page
Loading...
