Motorola iDEN i580 - Recommended Tools; Nozzles; Heat Shields; Tweezers

MECHANICAL PARTS REWORK AND REPAIR: Recommended Tools
78 68P80401P05
9.2 Recommended Tools
9.2.1 Nozzles
• N-Q07
• N-P20
• N-P32
• N-P68
• N-P84
• N-Q1420
9.2.2 Heat Shields
• A
• F
• J
• I, and
• L (new)
9.2.3 Tweezers
Excelta 5CSAD or similar
9.2.4 Probe/Pick
BeauTech 241 or similar
9.2.5 Vacuum Pick
X-Kar XVP-200 or similar
9.3 Recommended Supplies
Indium Indalloy NC771 flux pen (Motorola P/N 1185768C01) for rework of bottom connector, RF
connector and switches
9.4 Rework/Repair Requirements:
9.4.1 Temperatures:
• Bottom heat is necessary to rework Falcon boards
• Use Lead-free Temperature Profile.
• Ιndium Indalloy NC771 flux pen (Motorola P/N 1185768C01) must be used for rework of
bottom connector, RF connector and switches