PREPARING FOR FIELD LEVEL TESTING: Remove Main Board, Keypad
68P80401P05 53
7.13 Remove Main Board, Keypad
Tools: Black Stick, Tweezers.
7.13.1 Remove:
1. Wedge black stick under flip flex connector. Gently pry upwards along length until release.
2. Lift main board straight up from housing bosses.
3. Remove the housing keypad backer.
4. Lift Keypad straight up from housing frame
5. Clean around keypad holes. Replace keypad if worn or dirty
Figure 7-7.
1
4
Housing Bosses
To Next Page
Loading...
