14
Installing the Handsfree Kit
Installing the External Speaker
Note:
Always use the supplied
mounting hardware.
1
Securely mount the speaker in
the passenger footwell, either
to the transmission hump
(center console) or beneath
the dash. Position the speaker so that it does not
directly face the microphone and does not interfere
with either the passenger or automobile seat.
Caution:
The location of the external speaker MUST NOT
interfere with the vehicle’s air bag deployment.
2
Connect the speaker to the electronic module.
Installing the User Interface Module
1
Remove the backing of the
tape on the bottom of the
User Interface Module (UIM).
2
Select a suitable location on
the vehicle dash, within easy
reach of the driver, and mount the UIM. The UIM can
be mounted anywhere on the dash.
Caution:
The location of the UIM
MUST NOT
interfere
with the vehicle’s air bag deployment.
Caution:
The mounted UIM
MUST NOT
create a visual
distraction.
Caution: DO NOT
mount the UIM on the steering wheel.
3
Connect the UIM to the interface cable.
BTHandsfree_multi.book Page 14 Tuesday, July 12, 2005 8:46 AM
To Next Page
Loading...
