13
Installing the Handsfree Kit
Installing the
Microphone
1
Attach 1 side of the
VELCRO
®
tape to the bottom
side of the microphone.
2
Select a suitable mounting
location and mount the
microphone:
•
It is recommended that the
microphone be mounted on the overhead console or
the headliner between the driver and passenger.
•
Locate the microphone no more than 16 inches
(40 cm) from the driver's mouth and out of direct air
flow from vent or defrost.
•
Aim the microphone directly toward the driver. The
front of the mic should point toward the driver. The
wire comes out the back of the mic.
•
Do not allow anything (such as a rear-view mirror or
sun visor) to block the path between the microphone
and the driver.
•
Mount the microphone firmly so that vibrations do not
affect audio quality.
Caution:
The location of the microphone MUST NOT
interfere with the vehicle’s air bag deployment.
3
Connect the microphone to the interface cable.
BTHandsfree_multi.book Page 13 Tuesday, July 12, 2005 8:46 AM
To Next Page
Loading...
