Receiving a Phone Call
To receive a phone call:
• Your phone must be switched on and unlocked.
• You must be in an area where there is GSM service.
• Your Call Diversion and Call Barring settings should not be set
to divert or bar incoming calls.
When your phone receives a call, it will ring and the display will
show the Call message (if you have Caller Line Identification,
the caller’s number will be displayed instead).
To answer the call, pick up the handset or press O.
If you do not wish to answer a call you can either:
Press and release the C key. If you have enabled the
'Detailed Diverting - If Busy' option in the Options Menu, the
caller will be diverted to the forwarding number, otherwise
the caller will hear the busy tone.
or
Press and hold the C key. This will reject the incoming call.
No call divert option will be offered.
If your phone rings and you do not answer it, the message
Unanswered Call will be displayed to show you that a call
attempt was received.
Ending a Phone Call
To end a phone call, press O or C, or replace the handset in
the hang up cup.
Handsfree Calls
Making a Handsfree Phone Call
Leave the handset in the hang up cup. Enter the number using
the digit keys, press O, and talk into the microphone. End the
call by pressing O or C.
Receiving a Phone Call Handsfree
Leave the handset in the hang up cup. Answer the phone by
pressing O and talk into the microphone. End the call by
pressing O or C.
Switching from Handsfree to Handset
Lift the handset from the hang up cup.
Switching from Handset to Handsfree
Press N and replace the handset in the hang up cup.
To Next Page
Loading...
