Phone Setup Menu
Change SIM PIN2 Code
This option is used to change your PIN2 security code.
When you select this option you must enter the old PIN2 security
code before you can proceed.
You will be asked to enter a new, four to eight digit code to
replace the old PIN2 security code. The new PIN2 security code
must be entered again as confirmation.
! If the PIN2 security code is entered incorrectly three times in a
row, the Blocked message will be displayed.
When the Blocked message is displayed, you are not allowed
access to menu items that require you to enter the PIN2 code, for
example ‘Setup Fixed Dialling’ and ‘Call Charge Settings’.
If you receive the Blocked message when you try to enter your
PIN2 code, you will need to unblock and change the code using
the following key sequence:
* * 0 5 2 * EO
J O J O
AThe 8-digit unblocking code will have been provided with your
SIM card by your Cellular Service Provider.
! If the PIN2 unblocking operation is performed incorrectly 10
times in a row, your PIN2 code will become permanently
blocked.
ONew Security Code
The security code is used to control access to security and other
options within the menus.
This option is used to change the security code, which is set at
manufacture to 000000.
Once selected, you will be asked to enter the current security
code before you can proceed.
You will then be asked to enter a new, six digit code to replace
the old security code.
AIn order to safeguard your phone, you should change your
security code from the factory setting as soon as possible.
OExtended Menus
This option is used to switch the extended menus on or off.
If the extended menu option is switched off, you will not be able
to access any of the extended features.
The option has two settings, On or Off.
OLanguage Selection
This option is used to change the language for display messages.
The option has multiple settings.
When you select a language, all further display prompts and help
messages will be in the selected language.
L Press and hold M. Extended Menus will be temporarily
activated until you exit the Options menu.
To Next Page
Loading...
