Call Related Features Menu
Talk and Fax
This is a network feature that allows you to speak and then send
or receive a fax during the course of a single call.
AYour phone supports a data and fax transmission speed of up
to 9600 bps.
Before making a Talk and Fax call, ensure that:
• Your phone is “fax-ready” (it has been switched off,
connected to the fax, then switched back on). Connecting
your phone to the fax in the middle of the call will not work.
• The Talk and Fax mode is set to On.
A Talk and Fax call automatically switches to fax mode when you
start sending the fax. While the fax is being transmitted, the
message Fax in progress will be displayed. The call
automatically ends when the fax transmission is complete. You
cannot switch back to voice mode in the same call.
AWhile a Talk and Fax call is active, incoming call services like
Call Waiting and Call Holding are suspended.
If you receive a Talk and Fax call when:
• Your phone is not fax-ready - you can only talk.
• Your phone is fax-ready but Talk and Fax mode is off - the call
is automatically routed to your fax (you cannot talk).
On
Switches Talk and Fax mode on for the next and all subsequent
calls.
Off
Switches Talk and Fax mode off for the next and all subsequent
calls.
OCall Holding and Call Waiting
Your phone supports the GSM network options of Call Holding
and Call Waiting. Using these options you can place a current
phone call on hold and accept an incoming call or start a second
call.
The Call Waiting menu item has two settings On or Off. If you
select Off, you will be not be notified of waiting calls. The person
trying to contact you will either receive the busy tone, or be
diverted by the ‘Detailed Diverting - If Busy’ option.
If Call Waiting is On, you will be notified of a waiting call by an
audible alert and by the message Call Waiting - Answer?.
You can press the O key to accept the waiting call, or use the
M key to scroll to an alternative option and then press O.
AIf you have Caller Line Identification, the caller’s number is
displayed instead of the Call Waiting message.
To Next Page
Loading...
