BASIC LEVEL CHECKS AND SELF TESTS: Self-Test Procedures
5-12 68P80400P73-A
• GPS PIN — enables and disables your phone’s GPS PIN security feature. To turn the GPS
Enabled security feature on or off:
1. From the main menu, select Settings > Security > GPS PIN.
2. Scroll to On or Off.
3. Press
O
.
4. Enter the current GPS PIN.
Note: When you receive your phone, your GPS PIN is 0000.
5. Press
O
.
To change your GPS PIN:
1. From the main menu, select Settings > Security > Change Password > GPS PIN.
2. Enter the current GPS PIN.
Note: When you receive your phone, your GPS PIN is 0000.
3. Press
O
.
4. Enter the new 4- to 8-digit GPS PIN.
5. Press
O
.
6. Enter the new 4- to 8-digit GPS PIN to confirm.
7. Press
O
.
• Change Password — changes your phone unlock code, security code SIM PIN, and GPS PIN.
Advanced Features
The Advanced menu contains advanced and rarely used Settings features.
• Alert Timeout — controls the amount of time a tone continues to sound when you receive a
message notification or call alert.
• Headset/Spker—If you use a headset or similar device with your phone, you can set your
phone to send incoming sound to the headset only, or to the headset and the speaker at the same
time:
1. From the main menu, select Settings > Advanced > Headset/Spker.
2. Press
O
.
3. Scroll to HdsetOnly to send incoming sound to the headset only.
-or-
Scroll to Hdset&Spker to send incoming sound to the headset and the speaker at the same
time.
4. Press
O
.
• Connectivity — Network ID sets the phone’s network IDs and their roaming options under the
direction of your service provider; Master Reset lets your service provider to reset your service
in the event of a security or provisioning problem.
• Reset Defaults — Reset Settings returns all settings to their original defaults; Reset All returns
all settings to their original defaults and erases all stored lists. Use only under the direction of
your service provider.
To Next Page
Loading...
Need help?
General
