Motorola IT.6.1X - 6 Clock & Alarm; Set Date and Time; Set Alarm; Set Alarm Melody

25Clock & Alarm
6. Clock & Alarm
If you subscribe to your network’s Caller ID service and Auto clock is set to on, the time
on your IT.6X may be set automatically each time you receive a call, depending on your
network provider. (Only applicable to FSK caller ID system).
You can also set or adjust the time using the
Clock/Alarm menu.
6.1 Set date and time
1. Press M, scroll d to Clock/Alarm and press M.
2. Display shows
Date & Time , then press M.
3. Enter the date using the format DD-MM-YY e.g. 04/08/15 for 4 August 2015 and press
M.
4. Enter the time using the 24 hour format
HH:MM , e.g. 14:45 for 02.45pm and press M.
5. Press
e to return to standby.
6.2 Set alarm
1. Press M, scroll d to Clock/Alarm and press M.
2. Scroll
d to Set Alarm and press M.
3. Scroll
u or d to O , On Once or On Daily and press M.
4. If you select
On Once or On Daily , enter the time using the 24 hour format HH:MM , e.g.
14:45 for 02.45pm and press
M.
5. Press
e to return to standby.
When the alarm goes o, press any key to stop the ring.
NOTE
Once the alarm is set to on, the
icon is displayed.
The alarm will ring at the medium level.
Alarm On and the will flash on the display.
6.3 Set alarm melody
There are 3 alarm melodies.
1. Press
M and scroll d to Clock/Alarm .
2. Press
M.
3. Scroll
d to Alarm Tone and press M.
Melodies are played.
4. Scroll
u or d to select a melody.
5. Press
M to conrm.
6. Press
e to return to standby.