Motorola IT.6.1X User Manual

7Getting started
Connecting the base
1. Plug the telephone line cord into the socket marked on the underside of the base.
2. Plug the power adaptor into the socket marked
on the underside of the base and
plug the other end into the mains power wall socket. Switch on the mains power.
Charging the handset
1. If you are charging the batteries for the rst time, place the handset on the base to
charge for at least 24 hours continuously.
2. When the handset is fully charged, the
icon will appear steady on the display. Plug
the other end of the telephone line cord (make sure that one end is already plugged
into the base) into the telephone wall socket.
NOTE
You cannot access the battery in the handset. Do not attempt to remove the battery, as
you may damage the phone. If you need to replace the battery, contact customer service
helpline found in this user guide.
Connecting the handset and charger
(for multi-pack only)
If you have purchased a multiple pack, you will need to carry out this process for all the
handsets and chargers.

Motorola IT.6.1X Specifications

General

Type	DECT telephone
Ringer type	Polyphonic
Handset type	Wireless handset
Answering machine	Yes
Number of melodies	10
Maximum indoor range	50 m
Maximum outdoor range	300 m
Elderly phone	No
Mounting type	Desk
Product color	White
Phonebook capacity	100 entries
Number of handsets included	1
Display diagonal	2.2 \
Display number of lines	2 lines
Volume control	Digital
Call list capacity phonebook	50
Standby time	130 h