33Advanced settings
4. Scroll to the required range either
House
,
Apartment
or
Room
and press M.
To switch ECO mode o select
O
.
5. Press
e to return to standby.
A conrmation beep is emitted and when the range is set and the
icon shows on the
display.
8.12 ECO PLUS
When ECO PLUS is activated and the unit has been idle for 1 minute the transmitted
power between the handset and the base will stop, an incoming call or pressing any key
will activate the unit and it will revert back to the normal mode. This feature is set to
O
by
default.
1. Press
M, scroll d to
Advanced Set
and press M.
2. Scroll
d to
ECO Mode
and press M.
3.
ECO mode
is displayed, press M.
4. Press
u or d to select
On
or
O
. Press M to conrm.
5. Press
n to return to standby.
A conrmation beep is emitted and when ECO plus is set to On and the
icon shows on
the display.
8.13 Call barring
Prevent certain numbers from being dialled from your IT.6X. Store up to four specic
numbers, each up to 4 digits – for example, international or local prexes.
Bypass Call barring by switching the setting to
O
.
NOTE
If you switch Call barring on,
Barr Mode On
will be displayed on your screen in standby
mode.
8.13.1 Switch call barring on/o
1. Press
M, scroll d to
Advanced Set
and press M.
2. Scroll
d to
Call Barring
. Press M.
3. Enter the master PIN (default setting 0000) and press
M.
4.
Mode
is displayed. Press M.
5. Press
u or d to select
On
or
O
. Press M to conrm.
6. Press
e to return to standby. You can now set the number. (See below)
8.13.2 Set a number to be barred
1. Press M, scroll d to
Advanced Set
and press M.
2. Scroll
d to
Call Barring
. Press M.
3. Enter the master PIN (default setting 0000) and press
M.
To Next Page
Loading...
Need help?
General
