32 Advanced settings
8.8 De-register a handset
Use one handset to delete another. You cannot delete the handset that you are using.
1. Press
M, scroll d to
Advanced Set
and press M.
2. Scroll
d to
Unregister
and press M.
3. Enter the 4 digit master PIN and press
M.
Display shows the rst registered handset number.
4. Scroll
u or d to select the handset you want to delete and press M.
Unregistered
is displayed on the handset screen.
8.9 PIN
The 4-digit master PIN is used when registering or de-registering a handset and when
changing some settings on your IT.6X. The default setting is 0000. You can change this PIN
for more security.
1. Press
M, scroll d to
Advanced Set
and press M.
2. Scroll
d to
PIN
. Press M.
3. Enter the current 4 digit master PIN and press
M. (Default setting 0000).
4. Enter the new PIN and press
M.
5. Press
e to return to standby.
NOTE
Make a note of your PIN. If you forget your PIN you will need to reset your product.
8.10 Reset
This will reset your IT.6X to its default settings.
1. Press
M, scroll d to
Advanced Set
and press M.
2. Scroll
d to
Reset
. Press M.
3.
Conrm?
is displayed. Press M.
NOTE
Entries stored in the phonebook are retained. After reset, depending on your country, the
welcome mode setting may be shown on the handset display.
8.11 ECO mode
Your IT.6X oers an ECO mode function which reduces the transmitted power and energy
consumption when switched on. This feature is set to
O
by default.
1. Press
M, scroll d to
Advanced Set
and press M.
2. Scroll
d to
ECO Mode
and press M.
3. Press
u or d to highlight
Range select
then press M.
To Next Page
Loading...
Need help?
General
