Multiple System And Talkgroup Selection
14
Multiple System And Talkgroup Selec-
tion
Multiple System Selection
This radio has ten Systems, eight Talkgroups in each
system, and ten Conventional Systems or Channels.
MAX638 mobile radios allow the operator to select up
to ten systems to be programmed into the radio. Each
system may have its own unique set of talkgroups, Call
Alert paging, and Private Conversation calls. After the
system has been selected, there is a delay of about
one second before the radio can receive or transmit
calls.
Trunked Systems are identified as numbers 1 through
0 (10). This trunked system number is always dis-
played on the left of the display.
Conventional Systems or Channels sequentially follow
the last trunked system. However, conventional sys-
tems appear as a number in the two rightmost digits.
The indication that the radio is on a conventional sys-
tem is seen when the display shows no letter or spe-
cial character.
This Manual: http://www.manuallib.com/file/2545286
To Next Page
Loading...
