Call Alert
16
Call Alert
Call Alert Decode
This feature allows an individual mobile unit in a sys-
tem to receive a Call Alert or page from a dispatcher to
leave a page in an unattended mobile unit. When the
mobile unit receives the Call Alert, the display shows:
This continues with beeps every four seconds until any
key/PTT is pressed. Call Alert pages will not be
received when the radio is engaged in voice conversa-
tion, has been turned off, or is out of the system range.
If your unit is equipped with optional horn/lights alert,
see the description of Horn/Lights given on page 30.
Call Alert Encode
The Call Alert Encode Feature allows the dispatcher
or supervisory unit to Call Alert or page up to eight
mobile units.
To send a Call Alert page, press the (Call) button
until the display shows:
To select a mobile ID from the ID list, press the talk-
group or talkgroup button. Each mobile ID is
identified as CA1 through CA8. Select the desired ID
and press the PTT switch momentarily to send the
CALL Alert.
Call
This Manual: http://www.manuallib.com/file/2545286
To Next Page
Loading...
Need help?
General