Motorola MAX638 - Site Lock and Switching Procedures; Site Locking and Auto-Switching

SmartZone/AMSS Roaming Features
24
• Locking and Unlocking a Site - As in AMSS, you
can force the radio to stay locked onto a site. Yet
you can still force the radio to scan to another site
while the site is locked. The radio will automatically
become site locked to the next site it finds.
• Site Switching in SmartZone - When the radio
(unlocked state) is out of range, it will automatically
scan for a new site from list of 32 channels.
Site Lock/Unlock
• If the radio is programmed to include SmartZone or
AMSS, it requires to designate the site from which it
should start operating on the system. To do so,
choose the proper mode from the mode list.
• In the unlocked mode (automatic roaming), the
radio switches between the repeater sites as one
goes out of range and another comes within range.
In the locked mode, the radio will remain on the cur-
rent site even if you go out of range of that site.
Both Site Lock/Unlock and Forced-Site Search are
available through the (menu) button.
When you are in Site Unlocked Mode and want to
change to Site Locked Mode.
• Press the (Menu) button until the display
shows:
• Press the (Select) button to enable Site Lock.
The display will change to:
Menu
Menu
Sel
This Manual: http://www.manuallib.com/file/2545286