Scan
28
The radio will sound four quick beats and the display
will show:
When in scan programming, use the talkgroup but-
ton or talkgroup buttons to scroll through the talk-
groups.
If you desire to include any talkgroup in the scan list,
press (select) button when the desired talk-group is
shown on the display. The display will show:
To deselect, again press the (select) button, the
display will show:
To exit from the scan programming feature, press the
(home) button. The display will show the home dis-
play.
A scan list is limited to eight members. A alert tone
sounds if you attempt to add more than eight mem-
bers.
If you select a talkgroup as a priority and there is
already a priority talkgroup in the scan list, then the
new talkgroup will be assigned as the priority talkgroup
and the old talkgroup will become a non-priority talk-
group.
Sel
Sel
Hm
This Manual: http://www.manuallib.com/file/2545286
To Next Page
Loading...
