Motorola MC67 Quick Start Guide

2
3
6
11
5
8
1
2
3
7
9
10
12
8
3
3
7
2
2
3
2
2
8
1
2
2
3
2
4
9
2
5
7
6
5
18
17
13
19
14
15
21
16
20
22
23
7
2
2
3
2
2
8
6
5
9
9
1 Talk
2 Navigation
3 Scan/Action Button
4 End
5 Orange Key
6 Blue Key
7 Home
8 Menu
9 Back
Numeric Keypad
Alpha-Numeric Keypad
Orange Key
>
>
Press the Orange key once to lock the
keypad into Alpha state.
Press the Orange key a second time to
return to the normal state.
Notifications
Charging/Battery Status LED:
Data Capture LED:
Slow blinking amber: Battery charging
Solid amber: Fully charged
Fast blinking amber: Charging error
Green: Good Decode
Data Capture
Charging/Battery Status
Radio Status
Radio Status LED:
Green: RF active
Note: Remove protective shipping film that covers the touch screen, exit
window and camera window before using.
Press the Orange key once to lock the keypad into
Alpha state.
Press the Orange key a second time to return to the
normal state.
Press the Blue key once to activate this state, followed
by another key.
Blue Key
>
Orange Key
>
>
4
(Note 1)
FEATURES CARD INSTALLATION
MicroSD Card Installation (Optional)
1. Remove the handstrap.
2. Lift the rubber access door.
3. Slide the SIM card holder up to
unlock.
4. Lift the SIM card holder.
5. Carefully lift the microSD card holder.
6. Insert the microSD card into the
card holder.
NOTE :
Proper position of the microSD card — the card
connector (i.e., gold contacts) should be facing out as
shown.
7. Gently lower the microSD card holder until it snaps
into place.
SIM Card Holder
microSD Card Holder
Rubber Access Door
SIM Card Installation (Optional)
8. Insert the SIM card into the SIM holder.
NOTE :
The proper position of the SIM card—the card
connector (i.e., gold area) should be facing outward
with the beveled corner facing away.
9. Lower the SIM card holder.
10. Slide the SIM card holder down to lock into place.
11. Close the rubber access door.
12. Install the battery.
MC67
WITH ANDROID™ OS
QUICK START GUIDE
1 Scan/Action Button
2 Up/Down Button
3 Microphone
4 Power Button
5 I/O Connector
6 Keypad
7 Scan/Action Button
8 Touch Screen (with screen
protector)
9 Data Capture LED
10 Charging/Battery Status LED
11 WAN Radio Status LED
12 Phone Speaker
13 Handstrap
14 Battery
15 Battery Latch
16 Camera Flash
17 Camera
18 Exit Window (see Data Capture
Options)
19 Tether
20 Scan/Action Button
21 Action Button
22 Stylus
23 Speaker
DSD Keypad
Note 1: To reset the MC67, press and hold the Power button until the menu appears
and then select Reset.
Use this key to access application dependent
function keys shown on the keypad in blue.
Use this key to access the secondary
layer of characters.
Use this key to access the secondary layer of characters

Motorola MC67 Specifications

General

Brand	Motorola
Model	MC67
Category	Handhelds
Language	English