Why won't my Motorola Handhelds MC67 turn on?
Your Motorola MC67 may not be turning on because the battery is not charged, so charge or replace it. Another reason could be that the battery is not installed properly, make sure it's correctly installed. Finally, the system may have crashed, in that case, perform a reset.
What to do if Motorola Handhelds MC67 rechargeable battery did not charge?
If your Motorola MC67 rechargeable battery isn't charging, the battery may have failed, so replace it. Another cause might be removing the MC67 from the cradle while charging; in that case, re-insert the MC67 in the cradle. Also, extreme temperatures prevent charging, avoid temperatures below 0 °C (32 °F) or above 40 °C (104 °F).
Why does my Motorola Handhelds MC67 keep shutting off?
Your Motorola MC67 might be shutting off due to inactivity; the device turns off after a set period. If running on battery, you can set this period from 1 to 5 minutes. Another reason could be a depleted battery, so replace it. Also, ensure the battery is properly inserted.
What does it mean when Motorola Handhelds MC67 won't turn on but LEDs blink?
If your Motorola MC67 doesn't turn on but two LEDs blink when pressing the power button, the battery charge is low. Charge or replace the battery.
How to fix Motorola Handhelds MC67 memory full message?
If you're getting a memory full message on your Motorola MC67, it could be due to too many files stored on the device. Delete unused memos and records, saving them to your host computer or using an SD card for extra storage. Alternatively, too many applications may be installed. Remove unused applications by going to Settings > System and tapping the Remove Programs icon.
Why my Motorola Handhelds MC67 does not decode with reading bar code?
If your Motorola MC67 isn't decoding barcodes, it could be due to several reasons: * A scanning application may not be loaded. * The barcode might be unreadable, ensure it's not damaged. * The distance between the device and barcode may be incorrect, adjust the scanning range. * The MC67 may not be programmed for the barcode type being scanned. * The device may not be set to beep on a successful decode, adjust the settings. * The battery might be low, check the battery level.
What to do if Motorola Handhelds MC67 data communication fails?
If data communication is failing on your Motorola MC67, it could be because the device was removed from the cradle or disconnected during communication; replace it in the cradle, or reattach the cable and re-transmit. Another cause may be an incorrect cable configuration.
How to fix Motorola Handhelds MC67 display when characters are not visible?
If you cannot see characters on the display of your Motorola MC67, make sure the device is powered on by pressing the Power button.
What to do if tapping icons doesn't work on Motorola Handhelds MC67?
If tapping icons or window buttons doesn't activate features on your Motorola MC67, the screen may not be calibrated correctly. Re-calibrate the screen by pressing the Blue key - Backspace key. If that doesn't work, the device may not be responding, try resetting it.
Why Motorola Handhelds MC67 cannot find Bluetooth devices?
If your Motorola MC67 can't find Bluetooth devices, you might be too far from the other Bluetooth devices; move closer, within 10 meters (32.8 feet). Also, ensure the other Bluetooth devices are turned on and set to discoverable mode.
To Next Page
General
