Figure 87: Accept Installation Screen
9 Touch Open to open the application or Close to exit the installation process. The application appears in the App
list.
Installing Applications Using a microSD Card
Caution:
When connecting the device to a host computer and mounting its microSD card, follow the host computer’s
instructions for connecting and disconnecting USB devices, to avoid damaging or corrupting files.
Procedure:
1 Connect the device to a host computer using USB. See USB Communication on page 55.
2 Copy the application .apk file from the host computer to the microSD card.
3 Remove the microSD card from the host computer.
4 Press and hold the Power button until the menu appears.
5 Touch Power off.
6 If hand strap is attached, slide the hand strap clip up toward the top of the device and then lift.
7 Press the two battery latches in.
8 Lift the battery from the device.
9 Lift the access door.
10 Insert the microSD card.
11 Replace the access door.
12 Insert the battery, bottom first, into the battery compartment in the back of the device.
13 Press the battery down until the battery release latch snaps into place.
14 Replace the hand strap, if required.
15 Press and hold the Power button to turn on the device.
16
Touch .
17 Note:
In File Browser, the microSD card path is /sdcard or /storage/sdcard1.
122 | Application Deployment
May 2015 | MN000116A02-A