Single Slot USB Cradle
This section describes how to set up and use a Single Slot USB cradle with the MC67. For USB communication setup
procedures see USB Communication on page 55.
The Single Slot USB cradle:
• Provides 5.4 VDC power for operating the MC67.
• Synchronizes information between the MC67 and a host computer. See USB Communication on page 55 for
information on setting up a partnership between the MC67 and a host computer.
• Charges the MC67’s battery.
• Charges a spare battery.
Setup
Figure 13: Single Slot USB Cradle Power and USB Connections
Charging the MC67 Battery
Connect the cradle to power. Insert the MC67 into the MC67 slot to begin charging.
Accessories | 29
MN000116A02-A | May 2015
To Next Page
Loading...
Need help?
General
