6 Remove the battery.
7 Lift the rubber access door.
8 Slide SIM card holder door up to unlock.
9 Lift the SIM Card holder door.
10 Remove SIM card from holder.
11 Close SIM card holder door.
12 Slide SIM card holder door down to lock into place.
13 Close the rubber access door.
14 Insert the battery, bottom first, into the battery compartment in the back of the MC67.
15 Press the battery down until the battery release latch snaps (two clicks) into place.
16 Replace the handstrap.
17 Perform a soft reset.
See Performing a Soft Reset on page 22.
Resetting the MC67
There are four reset functions:
• Soft reset
• Hard reset
• Enterprise reset
• Factory reset.
Performing a Soft Reset
Perform a soft reset if applications stop responding.
Procedure:
1 Press and hold the Power button until the menu appears.
2 Touch Reset.
3 The device reboots.
Performing a Hard Reset
Caution: Performing a hard reset with a SIM card installed in the MC67 may cause damage or data
corruption to the SIM card.
Perform a hard reset if the MC67 stops responding.
Procedure:
1 On a numeric or DSD keypad, simultaneously press the Power button and the 1 and 9 keys.
2 On a alpha-numeric keypad, simultaneously press the Power button and the W and C keys.
3 The MC67 shuts down and then reboots.
Performing an Enterprise Reset
An Enterprise Reset erases all data in the /cache and /data partitions and clears all device settings, except those
in the /enterprise partition.
22 | Getting Started
May 2015 | MN000116A02-A
To Next Page
Loading...
Need help?
General
