Figure 76: Enter Key Dialog Box
6 In the Enter key text box, enter the key name followed by the key value obtained in step 1, using the following
format:
<Key Name> <Key value in Hex String>
Example: key2 1234567890abcdef1234567890abcdef1234567890abcdef1234567890abcdef
The key value must be a 64 hexadecimal character string.
7 Touch OK. The key is imported into the device. The message successfully installed the key appears on the
screen.
Viewing Key List
Procedure:
1 Touch Key List.
Administrator Utilities | 103
MN000116A02-A | May 2015
To Next Page
Loading...
