Before performing an Enterprise Reset, copy all applications and the key remap configuration file that you want to
persist after the reset into the /enterprise/usr/persist folder.
Procedure:
1 Download the Enterprise Reset file from the Zebra Support Central web site.
2 Copy the M67N0JXXVRExxxxxxx.zip file to the root directory of the microSD card. See USB
Communication on page 55.
3 Press and hold the Power button until the menu appears.
4 Touch Reset.
5 Touch OK. The MC67 resets.
6 Press and hold the Right Scan/Action button.
7 When the Recovery Mode screen appears, release the button.
Figure 9: Recovery Mode Screen
8
Touch . The System Recovery screen appears.
Getting Started | 23
MN000116A02-A | May 2015
To Next Page
Loading...
Need help?
General
