13
English
If There is No LED Indication:
1. Check that the pager with battery is inserted correctly in the front pocket or the battery in the rear pocket.
2. Make sure that the transformer is plugged into an appropriate AC outlet.
3. Ensure that the transformer cable is plugged securely into the charger socket.
4. Confirm that the battery being used with the pager is listed in Table 1 on page 3.
SERVICE
Do not disassemble the Amplifier Charger; it is not repairable. Order replacement antennas (listed in Table 3
on page 4) or power supplies (listed in Table 2 on page 4) as necessary.
Note: Applicable to the battery pocket only if
the pocket prioritization feature is used.
The Pocket is Waiting for Charging
Current to be Available
Wait to charge — charging will begin when
current is made available by the higher-
priority pocket or device.
Table 5: Charger Status
LED Indication Charger Status
68012010008_b.book Page 13 Tuesday, May 6, 2014 2:07 PM
To Next Page
Loading...
Need help?
General
