3
English
BRIEF DESCRIPTION
The Amplifier Charger is intended for use with the Motorola-approved Lithium-ion rechargeable batteries
(listed in Table 1). The front pocket of the charger is capable of handling a pager with an attached battery. The
rear pocket is designed only to charge the above mentioned batteries (alone).
An illuminated LED indicates the state of charge for the front and rear pocket.
OPERATIONAL GUIDELINES
• Always remember to power the Amplifier Charger first before inserting the pager with the attached battery
into the front pocket or the auxiliary battery into the charger's rear pocket.
• The front pocket has charging priority over the rear pocket. Therefore, the rear pocket may not charge at
its full rate until the front pocket charging is complete.
• The Amplifier Charger is not designed to accommodate the alkaline battery tray.
MOTOROLA-AUTHORIZED BATTERIES
The batteries listed in Table 1 is approved for use with the Amplifier Charger.
Note: The Amplifier Charger is not designed to accommodate the alkaline battery tray.
Table 1: Motorola-Authorized Batteries
Kit (Part) Number Platform/Description
PMNN4438_ Battery, Li-Ion (UL Battery)
PMNN4451_ Battery, Li-Ion (Non-UL Battery)
68012010008_b.book Page 3 Tuesday, May 6, 2014 2:07 PM
To Next Page
Loading...
Need help?
General
