2
English
WARNINGS (CONTINUED)
6. Do not disassemble the charger; it is not repairable and replacement parts are not
available. Disassembly of the charger may result in risk of electrical shock or fire.
7. To reduce risk of electric shock, unplug the charger from the AC outlet before attempting
any maintenance or cleaning.
8. To reduce risk of injury, use charger with Motorola authorized power supplies listed in
Table 2.
9. This is a Class A product. In a domestic environment, this product may cause pager
interference in which case the user may be required to take adequate measures.
OPERATIONAL SAFETY GUIDELINES
• This equipment is not suitable for outdoor use. Use only in dry locations/conditions.
• Ensure the pager is dry before inserting into the Amplifier Charger.
• Connect equipment only to an appropriately fused and wired supply of the correct voltage (as specified on
the product). Disconnect from line voltage by removing main plug.
• The socket outlet to which this equipment is connected should be close by and easily accessible.
• In equipment using fuses, replacements must comply with the type and rating specified in the equipment
instructions.
• Maximum ambient temperature around the power supply equipment must not exceed 40 °C (104 °F).
• Output power from the power supply unit must not exceed the ratings stated on the product label located
on the bottom of the charger.
• Make sure the cord is located where it will not be stepped on, tripped over, or subjected to water, damage,
or stress.
W A R N I N G
68012010008_b.book Page 2 Tuesday, May 6, 2014 2:07 PM
To Next Page
Loading...
Need help?
General
