Chapter 4 Radio Programming and Tuning
4.1 Introduction
This chapter provides an overview of the MOTOTRBO Customer Programming Software (CPS), as
well as the Tuner and AirTracer applications, which are all designed for use in a Windows 8/72000/
XP environment. These programs are available in one kit as listed in Table 4-1. An Installation Guide
is also included with the kit.
4.2 Customer Programming Software Setup
The CPS programming setup, shown in Figure 4-1 is used to program the radio.
Figure 4-1. CPS Programming Setup
NOTE
Refer to the appropriate program on-line help files for the programming procedures.
Table 4-1. Software Installation Kits Radio Tuning Setup
Description Part Number
MOTOTRBO CPS, Tuner and AirTracer Applications CD RVN5115_
NOTE
Refer to appropriate program on-line help files for the programming procedures.
Computer USB ports can be sensitive to Electrostatic Discharge. Do not touch
exposed contacts on cable when connected to a computer.
Radio
Battery
Programming, Testing
& Alignment Cable
PMKN4012B
PMKN4013C or later.