5-22 Disassembly/Reassembly Procedures Radio Reassembly - Detailed
5.7.2 Speaker and Universal Connector Flex Reassembly
1. Insert the UC flex circuit through the speaker retainer.
Figure 5-28. Speaker retainer reassembly
2. Seat the speaker module in the recess of the front housing and firmly screw in the speaker
retainer.
3. Push the UC flex circuit through the UC slot on the front housing.
Figure 5-29. Speaker reassembly
NOTE
Ensure there is no unnecessary pressure is applied to the spring contact on the speaker
retainer.
To Next Page
Loading...