Motorola MTM800 Enhanced User Manual

20
English
DMO Repeater
Displayed when the repeater option in DMO is selected.
This icon has three states:
Solid – while the terminal has detected the repeater (i.e., when
the terminal receives a presence signal).
Blinking – while the terminal has not detected the repeater or
during attachment.
No icon – during a terminal to terminal and gateway call.
General Icons
All Tones Off / Duplex & Simplex Ring Muted
Indicates that all alert tones are off in the MTM800 or both
Simplex Ring volume is set to 0 and Duplex Ring volume is set
to 0.
Simplex Ring Muted
Indicates that Simplex Ring volume is set to 0 and Duplex Ring
volume is set to more then 0.
Duplex Ring Muted
Indicates that Duplex Ring volume is set to 0 and Simplex Ring
volume is set to more then 0.
Speaker Off
Indicates that the loudspeaker is switched off.
Low Audio
Indicate that the audio mode is changed to low.
High Audio
Indicate that the audio mode is changed to high.
RUI Pseudo Log On
Indicates that the user is pseudo logged on.
Pseudo Log On with Packet data
Indicates that the user is pseudo logged on and Packet Data at
the same time.
Emergency
Appears while the MTM800 Enhanced is in Emergency Mode.
List Scrolling
Displayed to indicate that the Rotary knob use is list scrolling,
as long as this use is selected.
New Message Has Arrived
Indicates a new message just arrived.
Status Icon Description

Motorola MTM800 Enhanced Specifications

General

Channel Spacing	25 kHz
Operating Temperature	-30°C to +60°C
Ingress Protection	IP54
Battery Type	Li-Ion
Encryption	Air Interface Encryption, End-to-End Encryption