2.13
Selecting Talkgroups
Follow these procedures to select talkgroup manually. If the selected talkgroups is an InterSystem
Interface (ISI) talkgroup, the radio can migrate to another talkgroup linked network, changing the
talkgroup automatically.
Procedure:
From the home screen, use one of the following methods:
• Select Options → TG by abc. Enter a talkgroup name and select the talkgroup name from the
list.
•
Select Options → TG by Folder. Select a folder (for example, Favorite) and then a talkgroup
name.
NOTICE: Your radio can access up to three levels of the folder structure.
•
Press Rotary Knob and rotate it until the required talkgroup name is displayed. Press Select to
confirm.
NOTICE: If the Rotary Knob mode is set to Scroll, then you do not need to press it to
enter the scrolling mode.
2.13.1
Talkgroup Icon Selection
Table 9: Talkgroup Icon
Icon Description
Displayed when the talkgroup is from a different network than the one currently
selected.
2.14
Using Timed Talkgroup Change
This feature allows you to switch a selected talkgroup between the currently selected talkgroup and a
predefined talkgroup (TMO or DMO), making the predefined talkgroup the selected talk group for a
predefined time by using a One-Touch button. After the timer expires, your radio returns to the
previously selected talkgroup.
Prerequisites:
Timed Talkgroup Change is assigned to a One-Touch button.
Procedure:
1 Press and hold the One-Touch button.
2 Your radio switches the selected talkgroup to the predefined talkgroup for a predefined amount
of time.
During the predefined time the radio initiates or joins group communication (SDS, status SDS, or
call) on the predefined talkgroup as the selected talkgroup.
Your service provider can assign a function to the second press of the One-Touch button to:
• Return to previously selected talkgroup
• Restart the predefined time
• No action
6866588D06–RB
Chapter 2: Getting Started
34 Send Feedback
To Next Page
Loading...
