2 Select More . . . → Networks → Network Sel → Any Network.
Your radio selects and registers to the network automatically from the predefined list.
4.14
Location
NOTICE: This feature is a paid feature.
This sub-menu allows you to enable the GPS, change GPS accuracy, and view your position and
testpage.
See Global Positioning System (GPS) Location Service on page 103.
4.14.1
Enabling GPS
Procedure:
1 From the home screen, press the Menu key.
2 Select More . . . → Location → Interface.
3 Select On.
NOTICE: Your service provider can enable this feature.
4.14.2
Viewing Your Position
Procedure:
1 From the home screen, press the Menu key.
2 Select Location → Position.
3
Scroll to view the results about the last time your location was calculated.
NOTICE: To refresh your position:
•
Select Position — the radio refreshes its position automatically
• Press Refresh
4.14.3
Changing GPS Accuracy
Procedure:
1 From the home screen, press the Menu key.
2 Select More . . . → Location → Accuracy.
3
Select one of the following:
• Medium (default) – Power consumption optimization is combined with less position accuracy.
• High – Better position accuracy is combined with less power consumption optimization.
NOTICE: If connected to an external charging device, the radio automatically enters the
High
mode.
6866588D06–RB
Chapter 4: Main Menu
Send Feedback 97
To Next Page
Loading...
