EasyManua.ls Logo

Motorola MTP810Ex - D-PTT Tones; Display; Setting Flip Display

Motorola MTP810Ex
126 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4.8.6.5.1
Setting Periodic Alert
Procedure:
1 From the home screen, press the Menu key.
2 Select Setup Tones Periodic Alert.
3 Select one of the following:
Alert — Activates/deactivates periodic tone.
Period — Indicates the time between each periodic tone.
4.8.6.6
D-PTT Tones
This menu item contains the settings for the Double PTT feature.
The Double PTT feature allows you to send a tone pattern (single, double, or triple) when the radio is in
idle or the Group Call mode by pressing the PTT button twice.
After the D-PTT tone is played, you can press and hold the PTT button once again to get the
permission to talk. Otherwise, if you press the PTT button while the D-PTT tone is played, it is ignored.
After the D-PTT tone is sent keeping the PTT button pressed, it results in permission to talk.
The D-PTT tone is sent over the air but is not audible on the sending radio.
4.8.6.6.1
Setting D-PTT Tones
Procedure:
1 From the home screen, press the Menu key.
2 Select Setup Tones
D-PTT Tones.
3 Select one of the following:
D-PTT Mode — Activates/deactivates D-PTT tone.
Tone Style— Indicates how many times the D-PTT tone is played.
4.8.7
Display
This menu item allows you to adjust your radio display settings.
4.8.7.1
Setting Flip Display
When and where to use:
The feature is useful for a user who has to wear the radio on a shoulder, belt, or lapel and at the same
time wishes to read the display upside down.
Procedure:
1 From the home screen, press the
Menu key.
2 Select Setup Display Flip Display.
3 Select one of the following:
6866588D06–RB
Chapter 4: Main Menu
80 Send Feedback

Table of Contents

Related product manuals