4.13.1
Selecting Network Operation Mode
Procedure:
1 From the home screen, press the Menu key.
2 Select Networks.
3
Select one of the following:
• Network Sel — Selects the network to which the radio is allowed to register.
• Trunked Mode — Switches to the mode using infrastructure.
• Direct Mode — Switches to the mode without using infrastructure.
• TXI Mode — Select Activate to stop sending any radio transmission.
NOTICE:
If the radio is in TXI Mode, it is not possible to switch from Direct Mode to
Trunked Mode.
4.13.2
Network Select
This sub-menu item allows you to select a network to register your radio. Network Sel is available only
in TMO or Gateway mode, otherwise your radio display Service Restricted message.
4.13.2.1
Selecting Your Network
Procedure:
1 From the home screen, press the Menu key.
2 Select Networks → Network Sel → Home Only.
Your radio registers to the home network.
4.13.2.2
Using Select Net Registration
Procedure:
1 From the home screen, press the Menu key.
2 Select More . . . → Networks → Network Sel → Select Net.
3 Select the required network from the list.
Your radio registers to the selected network.
4.13.2.3
Using Any Network Registration
When and where to use: Your radio has lost its home network coverage and wants to increase the
number of networks it can scan and register.
Procedure:
1 From the home screen, press the Menu key.
6866588D06–RB
Chapter 4: Main Menu
96 Send Feedback
To Next Page
Loading...
