NOTICE:
• Your service provider can configure the radio to turn on automatically after you insert
the battery.
• Your radio always powers up, if you remove the battery for a period shorter than 3–5
seconds.
2.2.5
Removing the Battery
IMPORTANT:
The following procedure must be performed only in non-hazardous environment.
Prerequisites: Turn off the radio.
Procedure:
1 Move the latch in the direction indicated by the arrow and hold it.
2 Slide the battery toward the bottom of the radio.
MN002033A01–AC (en-US)
Chapter 2: Getting Started
30 Send Feedback
To Next Page
Loading...
Need help?
General
