• Delete – deletes the device from the paired devices lists.
4.6.5
My Received Files
This menu item lists all files received by your radio via Bluetooth and allows you to manage them
My Received Files is visible only if the Object Push Profile (OPP) is enabled.
4.6.5.1
Receiving Files through Bluetooth
Prerequisites:
The radio receives a file transfer request from another Bluetooth-enabled device. Radio is in
Discoverable Mode.
Procedure:
Press Accept when the Receive file(s) via Bluetooth from:<Device Name>
message appears on the display.
The file is saved either in the internal radio memory or on the microSD card and can be accessed via
the My Received Files menu item.
NOTICE: If a file with the same name already exists, the radio appends a number in
parentheses to the original file name.
NOTICE: If there is not enough space on the to save a file, File cannot be received,
memory full message is displayed.
4.6.5.2
Sending Files through Bluetooth from My Received Files
By using this procedure, you can send any files stored in My Received Files. Alternatively, for sending
only pictures (JPEG files), you can use the Picture Browser. For details, see: Sending Pictures via
Bluetooth from the Picture Browser on page 87.
Procedure:
1 From the home screen, press the Menu key.
2 Select Bluetooth → My Received Files
3 Highlight the required file and press the Menu key.The maximum recommended file size is 2
GB.
4 Select Forward.
5
Perform one of the following actions:
If…
Then…
If the paired devices list is empty, wait until the radio displays the list and then high-
light the device and press Connect.
If the required recipient device is
present on the paired devices list,
highlight the device and press Select.
If the required recipient device is
not present on the paired devices
list,
perform the following actions:
a Refresh the list by selecting Search.
MN002033A01–AC (en-US)
Chapter 4: Main Menu
90 Send Feedback
To Next Page
Loading...
Need help?
General
