93
Examples:
◆ 40bit: 02468ACE02
◆ 128bit: 0123456789ABCDEF0123456789
◆ 256bit: 592CA140F0A238B0C61AE162F592CA140F0A238B0C61AE162F21A09C
Use WEP encryption key (1 – 4) #: Specifies which key the Gateway will use to encrypt transmitted
traffic. The default is key #1.
Click the click Save Changes button.
Any WEP-enabled client must have an identical key of the same length as the Router, in order to suc-
cessfully receive and decrypt the traffic. Similarly, the client also has a ‘default’ key that it uses to
encrypt its transmissions. In order for the Router to receive the client’s data, it must likewise have the
identical key of the same length.
To Next Page
Loading...
