6
Introduction
Operating Your Control Head
Your control head is designed for ease of use and flexibility of feature
control. Before operating the radio, familiarize yourself with the
various controls, indicators, and alert tones. Refer to the foldout
diagrams in the front and back of this manual for your particular
control head.
Turning On the Radio
Do the following:
• To turn the radio on, push the Volume/Power knob on the
control head to turn it on.
After a short time, the red, green and yellow LEDs light up, indicating
that the radio is powering up.
The display then shows PM 1500.
When the radio is fully powered on, the Zone and Channel text and
menu items are displayed. The backlight will turn on to the last
selected dim level.
Note: Pressing the Power/Volume Knob before the LEDs light up
will be ignored.
Pressing the power button anytime after the LEDs light up
will TURN OFF the radio.
Note: If FL ##/## appears in the display, the radio will not function
until the condition has been corrected.
If ERR ##/## appears, some non-critical data has been
changed. If either of these displays appear, if the display
goes blank, or if the unit appears to be locked up, refer to the
“Troubleshooting” section.
To Next Page
Loading...
