PM1500 Mobile Radio with Control Head 9
Introduction
Interpreting Radio Status Indicators
Your radio has three types of status indicators:
• Status annunciators that appear on the display
• LED indicators
•Alert tones
Status Annunciators
These are small icons that appear on the display above the channel
name indicating status as you operate various radio features.
Annunciator Indication
C
Carrier Squelch
All active traffic on the selected channel in being
monitored.
When not displayed, traffic is not open to
monitoring.
F
Call Received
Flashes when a Selective Call, Call Alert is
received.
G
Scan
The radio is scanning a preprogrammed list of
channels/modes for activity.
H
Priority Scan
Indicates scanning of a priority mode (flashing for
Priority 1 Mode; solid for Priority 2 mode).
R
Low Tx Power Level
Transmission Power is low. (By default, the radio
transmission power is set too high, at which state
this icon will not show up.)
J
Direct/Talkaround
When on, indicates your are talking directly to
another radio.
When off, you are talking through a repeater.
To Next Page
Loading...
