PM1500 Mobile Radio with Control Head 27
General Radio Features
Sending a Call Alert
1 Press the PAGE softkey.
The Call Alert indicator lights and a valid-key chirp sounds.
For MDC, the display shows the last transmitted/received unit ID
number.
For DTMF, it shows the last transmitted ID.
For QCII, it shows the first entry in the call list.
2 Select a radio in one of the following ways:
• From the ID number list:
– Do nothing if you want to call the unit ID currently
displayed.
OR
– Use the prestored list by using the mode knob or
navigation keys on the keypad mic to locate the name/ID
you want to call.
OR
– Enter, using the keypad on the keypad mic, the ID of the
desired unit.
Note: Using the keypad to enter the ID of another unit can only be
accomplished from the first display shown when Page was
entered. If the list has been entered, scroll to the first display.
3 Press the SEL softkey or the microphone PTT button.
The display changes to PLS WAIT.
To Next Page
Loading...
