62
other features—personalize
Find it:
s
>
w
Settings
>
Personalize
>
Voice Dial Setup
>
Adapt Digits
1
Press
Start
.
2
When the phone prompts you to say the first digit
sequence, wait for the beep, then repeat the
digits in a normal tone of voice.
3
If the recording sounds acceptable (no mistakes
or background noises), say “Yes” or press
Yes
.
or
If the recording is not acceptable, say “No” or
press
No
. When prompted to say the digits again,
wait for the beep and say the digits again. The
phone will prompt you to repeat this process with
up to twelve additional sets of digits.
4
When the phone prompts, “More Adaptation?”,
press
Yes
to continue or
No
to end the process.
When the adaptation process is complete, the
phone will say “Adaptation Complete.”
Tip:
When adapting speech recognition to your voice:
•
Choose a quiet place for recording.
•
Wait for the beep before you speak.
•
Speak at a normal speed and volume,
pronouncing each digit distinctly. Avoid
pausing between digits.
•
If you make a mistake while recording a
sequence of digits, or if an unexpected noise
spoils the recording, record that sequence
again.
To reset speech recognition to the factory defaults:
Find it:
s
>
w
Settings
>
Personalize
>
Voice Dial Setup
>
Reset Digits
more personalizing features
features
call & key volumes
s
>
w Settings
>
Ring Styles
> Style
Detail
Scroll to
Ring Volume
or
Key Volume
and press
Change
.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
